Latest Real JN0-370 Tests Dumps and VCE Exam Questions 91-100

EnsurepassQuestion 91 Physical interface: xe-0/0/8, Enabled, Physical link is Up Interface index: 49164, SNMP ifIndex: 525, Generation: 138 Description: pod29.pgp.com Link-level type: Ethernet, MTU: 2500, Speed: 10Gbps, Duplex: Full-Duplex, BPDU Error: None, MAC-REWRITE Error: None, Loopback: Disabled, Source filtering: Disabled, Flow control: Disabled Device flags : Present Running Interface flags: SNMP-Traps Internal: 0x0 Link flags : None CoS queues : 12 supported, 12 maximum usable queues Hold-times Read more […]

Continue reading


Latest Real JN0-370 Tests Dumps and VCE Exam Questions 81-90

EnsurepassQuestion 81 According to Juniper Networks recommendations, specific ports have been reserved on the EX4200 switches to connect to each of the QFX3000-M QFabric system device types. Which ports connect to the Interconnect devices? A. ports 0-3 B. ports 16-19 C. ports 20-23 D. uplink port 0 and port 1   Answer: B     Question 82 What is the function of an Interconnect device in a QFabric system? A. It connects endpoints such as servers or storage devices to the QFabric system. Read more […]

Continue reading


Latest Real JN0-370 Tests Dumps and VCE Exam Questions 71-80

EnsurepassQuestion 71 By default, which two TCP/IP ports does iSCSI use for data traffic? (Choose two.) A. 110 B. 860 C. 1433 D. 3260   Answer: B,D     Question 72 A customer wants to set up a QFX3000-M QFabric system to consolidate existing 1 GbE networks and to provide a low latency and high performance 10 GbE network. Network engineers must consider the licenses required to setup this system. Which two licenses are required? (Choose two.) A. The license for the FCoE-to-FC gateway. Read more […]

Continue reading


Latest Real JN0-370 Tests Dumps and VCE Exam Questions 61-70

EnsurepassQuestion 61 What is a Fibre Channel N_Port? A. a port that resides on an Fibre Channel switch used to connect to a host B. a port that resides on a Fibre Channel switch used to connect to another Fibre Channel switch C. a port that resides on a host or a storage device used to connect to a Fibre Channel switch D. a port that resides on a Fibre Channel switch used for diagnostics   Answer: C     Question 62 You are configuring the link aggregation groups (LAG) in a QFabric Read more […]

Continue reading


Latest Real JN0-370 Tests Dumps and VCE Exam Questions 51-60

EnsurepassQuestion 51 The Node device LC0 is receiving packets destined to the host on the Node device LC1. The source IP address of the packets is 20.0.0.1 and the destination IP address is 77.0.0.1. How do you verify that the route to destination 77.0.0.1 exists in the RPDf table on LC0? A. Use the show route 77.0.0.1 command on Node device LC0. B. Use the show route table inet.0 command on Node device LC0. C. Use the show route fabric table default.bridgevpn.0 77.0.0/24 extensive command on Node Read more […]

Continue reading


Latest Real JN0-370 Tests Dumps and VCE Exam Questions 41-50

EnsurepassQuestion 41 You want to change the device mode of a QFX3500 to connect to a QFabric system. Which command would you use? A. [edit] user@qfabric# request chassis device-mode node-device B. user@qfabric> request chassis device-mode node-device C. [edit] user@qfabric# request system device-mode node-device D. user@qfabric> request system device-mode node-device   Answer: B     Question 42 Which three lengths of 10-Gigabit Ethernet passive direct attach copper (DAC) cables Read more […]

Continue reading


Latest Real JN0-370 Tests Dumps and VCE Exam Questions 31-40

EnsurepassQuestion 31 A QFabric system is configured with only RSTP. A connected switch is configured with VSTP with all the ports in the trunk port allowing all VLANs. Which two behaviors are expected? (Choose two.) A. The QFabric system will drop VSTP packets. B. The QFabric system will flood VSTP packets in their respective VLANs. C. The QFabric system will process VSTP packets and converge on every VLAN. D. The QFabric system will only converge on one instance.   Answer: B,D     Read more […]

Continue reading


Latest Real JN0-370 Tests Dumps and VCE Exam Questions 21-30

EnsurepassQuestion 21 You have enabled OSPF on your QFabric system. Which component will process the incoming hello packets? A. the active Routing Engine on the network Node group B. the PFE on the network Node group C. the Routing Engine on an elected member of the network Node group D. both Routing Engines on the network Node group   Answer: A     Question 22 When bringing up a QFX3000-M QFabric system control plane network, which three actions should be performed? (Choose three.) Read more […]

Continue reading


Latest Real JN0-370 Tests Dumps and VCE Exam Questions 11-20

EnsurepassQuestion 11 What does a Type-Length Value (TLV) for iSCSI provide in a QFabric system? (Choose two.) A. the ability to classify iSCSI flows on PFC channels B. the ability to create lossless iSCSI flows C. the ability to pause iSCSI flows D. the ability to create lossy iSCSI flows   Answer: A,B     Question 12 You want to maximize performance and ensure low latency for critical server applications using a QFabric system. What would be used as the first hop gateway for the Read more […]

Continue reading


Latest Real JN0-370 Tests Dumps and VCE Exam Questions 1-10

EnsurepassQuestion 1 Which three statements are correct about the QFabric system control plane? (Choose three.) A. It discovers and manages paths. B. It manages FCoE-to-FC conversions. C. It manages Layer 2 and Layer 3 load balancing between nodes and interconnects. D. It discovers and provisions the system. E. It manages routing and switching protocols.   Answer: A,D,E     Question 2 The QFabric system data plane performs which three functions? (Choose three.) A. It provides connectivity Read more […]

Continue reading