Latest Real JN0-101 Tests Dumps and VCE Exam Questions 171-180

EnsurepassQUESTION 171 Referring to the exhibit, which command would you use to add an additional address to the ge-0/0/9.0 interface?   interfaces { ge-0/0/8 { unit 0 { family inet { address 192.168.1.1/24; } } } ge-0/0/9 { unit 0 { family inet { address 192.168.10.1/24; } } } }   A.        [edit interfaces ge-0/0/9 unit 0] user@router# set family inet address 192.168.100.1/24   B.        [edit interfaces ge-0/0/9 Read more […]

Continue reading


Latest Real JN0-101 Tests Dumps and VCE Exam Questions 161-170

EnsurepassQUESTION 161 Referring to the exhibit, which type of classifier is being used in this CoS configuration?   [edit class-of-service] user@router# show interfaces { ge-0/0/2 { unit 0 { classifiers { inet-precedence default; } } } }   A.      behavior aggregate B.      policer C.      multifield D.      forwarding policy   Correct Answer: A     QUESTION 162 Referring Read more […]

Continue reading


Latest Real JN0-101 Tests Dumps and VCE Exam Questions 151-160

EnsurepassQUESTION 151 Which CLI command is used to display output one page at a time?   A.      user@router> show interfaces | no-more B.      user@router> show interfaces | trim C.      user@router> show interfaces D.      user@router> show interfaces | display   Correct Answer: C     QUESTION 152 What information is used by a switch to forward an Ethernet frame to Read more […]

Continue reading


Latest Real JN0-101 Tests Dumps and VCE Exam Questions 141-150

EnsurepassQUESTION 141 By default, which two statements are true about export routing policies? (Choose two.)   A.      Export policies can evaluate only active routes. B.      Export policies can evaluate all routes. C.      Export policies can be applied to the forwarding table. D.      Export policies can be applied directly to interfaces.   Correct Answer: AC     QUESTION 142 Read more […]

Continue reading


Latest Real JN0-101 Tests Dumps and VCE Exam Questions 131-140

EnsurepassQUESTION 131 What information does the help reference command provide?   A.      a brief description of commands and their default values B.      the serial number and version number of the device used to open a support case with JTAC C.      a list of all the active hardware alarms on the device D.      a display of the current configuration while in operational mode   Correct Read more […]

Continue reading


Latest Real JN0-101 Tests Dumps and VCE Exam Questions 121-130

EnsurepassQUESTION 121 What is the default export routing policy for EBGP?   A.      Accept all active BGP routes. B.      Accept all BGP routes. C.      Accept no routes. D.      Accept all active IGP routes.   Correct Answer: A     QUESTION 122 By default, if equal-cost paths exist for the same destination, which action will the router take?   A.      Read more […]

Continue reading


Latest Real JN0-101 Tests Dumps and VCE Exam Questions 111-120

EnsurepassQUESTION 111 What are three benefits of class of service? (Choose three.)   A.      It can make a slow network faster. B.      It can prioritize latency-sensitive traffic. C.      It can eliminate congestion. D.      It can control congestion. E.       It can allocate bandwidth for different classes of traffic.   Correct Answer: BDE     QUESTION Read more […]

Continue reading


Latest Real JN0-101 Tests Dumps and VCE Exam Questions 101-110

EnsurepassQUESTION 101 Which statement is true regarding the Junos OS?   A.      All platforms running the Junos OS use the same source code base. B.      All platforms running the Junos OS use the same PFE. C.      All platforms running the Junos OS use a hard drive to optimize syslog data storage. D.      All platforms running the Junos OS use a separate process with protected memory space for Read more […]

Continue reading


Latest Real JN0-101 Tests Dumps and VCE Exam Questions 91-100

EnsurepassQUESTION 91 You have been asked to develop an application that uses only connection-oriented protocols. Which two protocols can you use? (Choose two.)   A.      PPP B.      UDP C.      TCP D.      ICMP   Correct Answer: AC     QUESTION 92 What are three valid match criteria in a firewall filter applied to a Layer 3 interface? (Choose three.)   A.      Read more […]

Continue reading


Latest Real JN0-101 Tests Dumps and VCE Exam Questions 81-90

EnsurepassQUESTION 81 You issue the ping interface t1-1/1/0 1.1.1.1 bypass-routing count 1000 rapid command. Which statement is correct?   A.      The count parameter creates a counter that you can view with the show firewall command. B.      The count parameter allows the router to count the number of pings for logging purposes. C.      The count parameter allows the router to pause for 1000 seconds before sending out Read more […]

Continue reading


Latest Real JN0-101 Tests Dumps and VCE Exam Questions 71-80

EnsurepassQUESTION 71 What are two valid actions for a routing policy? (Choose two.)   A.      discard B.      next policy C.      accept D.      ignore   Correct Answer: BC     QUESTION 72 Which statement describes an advantage of dynamic routing?   A.      Dynamic routing is typically more scalable when compared to static routing. B.      Read more […]

Continue reading


Latest Real JN0-101 Tests Dumps and VCE Exam Questions 61-70

EnsurepassQUESTION 61 What is the default import routing policy for OSPF?   A.      Accept all OSPF routes and install them into the inet.3 routing table. B.      Accept all OSPF routes and install them into the inet7.0 routing table. C.      Accept all OSPF routes and install them into the inet4.0 routing table. D.      Accept all OSPF routes and install them into the inet.0 routing table.   Read more […]

Continue reading


Latest Real JN0-101 Tests Dumps and VCE Exam Questions 51-60

EnsurepassQUESTION 51 You have a network containing 120 routers. You must establish and maintain connectivity between the loopback interfaces of all routers. Because of the critical services using the network, you need redundancy and fast failover. Which routing protocol should you use in this scenario?   A.      OSPF B.      RIP C.      BGP D.      static   Correct Answer: A     Read more […]

Continue reading


Latest Real JN0-101 Tests Dumps and VCE Exam Questions 41-50

EnsurepassQUESTION 41 You are at the top of the hierarchy and must configure OSPF on interface so-0/0/0 unit 100. Which two achieve this result? (Choose two.)   A.        set protocols set ospf area 0 set interface so-0/0/0.100   B.        set protocols ospf area 0 interface so-0/0/0.100 C.        edit protocols ospf interface so-0/0/0.100 D.        Read more […]

Continue reading


Latest Real JN0-101 Tests Dumps and VCE Exam Questions 31-40

EnsurepassQUESTION 31 What is the decimal equivalent of 10101010?   A.      182 B.      180 C.      172 D.      170   Correct Answer: D     QUESTION 32 Two devices on an Ethernet segment sent frames at the same time causing a collision. Which two statements are true? (Choose two.)   A.      Both devices stop transmitting, wait a random period of time, Read more […]

Continue reading


Latest Real JN0-101 Tests Dumps and VCE Exam Questions 21-30

EnsurepassQUESTION 21 When considering the default behavior of Junos platforms, which statement is true about archiving configurations?   A.      A system log message is generated, confirming the transfer attempt. B.      The destination filename format can be altered by configuration. C.      The frequency the system archives the configuration cannot be changed. D.      An archive log is created Read more […]

Continue reading


Latest Real JN0-101 Tests Dumps and VCE Exam Questions 11-20

EnsurepassQUESTION 11 What does the command show | compare rollback 1 display?   A.      the difference between the current candidate configuration and the candidate configuration from one commit ago B.      the difference between the current active configuration and the current candidate configuration C.      the difference between the current active configuration and the active configuration from one commit ago D.      Read more […]

Continue reading


Latest Real JN0-101 Tests Dumps and VCE Exam Questions 1-10

EnsurepassQUESTION 1 Which command is used to enable access to J-Web using HTTPS?   A.      set system remote-access profile https B.      set services remote-access profile j-web-https C.      set system services web-management https D.      set services web-management j-web-https   Correct Answer: C     QUESTION 2 What is the role of route preference?   A.      Read more […]

Continue reading