[Free] New Updated (October) Cisco 200-101 Real Exam 231-240

Ensurepass  QUESTION 231 A network administrator receives an error message while trying to configure the Ethernet interface of a router with IP address 10.24.24.24/29. Which statement explains the reason for this issue?   A.       VLSM-capable routing protocols must be enabled first on the router. B.        This address is a network address. C.        This address is a broadcast address D.       Read more […]

Continue reading


[Free] New Updated (October) Cisco 200-101 Real Exam 221-230

Ensurepass  QUESTION 221 Refer to the exhibit. What commands must be configured on the 2950 switch and the router to allow communication between host 1 and host 2? (Choose two.)     A.       Router(config)# interface fastethernet 0/0 Router(config-if)# ip address 192.168.1.1 255.255.255.0 Router(config-if)# no shut down   B.        Router(config)# interface fastethernet 0/0 Router(config-if)# no shut down Router(config)# Read more […]

Continue reading


[Free] New Updated (October) Cisco 200-101 Real Exam 191-200

Ensurepass  QUESTION 191 Refer to the exhibit. At the end of an RSTP election process, which access layer switch port will assume the discarding role?     A.       Switch3, port fa0/1 B.        Switch3, port fa0/12 C.        Switch4, port fa0/11 D.       Switch4, port fa0/2 E.        Switch3, port Gi0/1 F.        Read more […]

Continue reading


[Free] New Updated (October) Cisco 200-101 Real Exam 201-210

Ensurepass  QUESTION 201 Which statement about IPv6 is true?   A.       Addresses are not hierarchical and are assigned at random. B.        Only one IPv6 address can exist on a given interface. C.        There are 2.7 billion addresses available. D.       Broadcasts have been eliminated and replaced with multicasts.   Correct Answer: D       Read more […]

Continue reading


[Free] New Updated (October) Cisco 200-101 Real Exam 211-220

Ensurepass HOT EXAM! 100-105 Dumps VCE PDF 200-105 Dumps VCE PDF 300-101 Dumps VCE PDF 300-115 Dumps VCE PDF 300-135 Dumps VCE PDF 300-320 Dumps VCE PDF 400-101 Dumps VCE PDF 640-911 Dumps VCE PDF 640-916 Dumps VCE PDF 70-410 Dumps VCE PDF 70-411 Dumps VCE PDF 70-412 Dumps VCE PDF 70-413 Dumps VCE PDF 70-414 Dumps VCE PDF 70-417 Dumps VCE PDF 70-461 Dumps VCE PDF 70-462 Dumps VCE PDF 70-463 Dumps VCE PDF 70-464 Dumps VCE PDF 70-465 Dumps VCE PDF 70-480 Dumps VCE PDF 70-483 Read more […]

Continue reading


[Free] New Updated (October) Cisco 200-101 Real Exam 181-190

Ensurepass  QUESTION 181 Which address is the IPv6 all-RIP-routers multicast group address that is used by RIPng as the destination address for RIP updates?   A.       FF02::6 B.        FF02::9 C.        FF05::101 D.       FF02::A   Correct Answer: B     QUESTION 182 Which command shows your active Telnet connections?   A.       Read more […]

Continue reading


[Free] New Updated (October) Cisco 200-101 Real Exam 171-180

Ensurepass  QUESTION 171 Which term describes a spanning-tree network that has all switch ports in either the blocking or forwarding state?   A.       converged B.        redundant C.        provisioned D.       spanned   Correct Answer: A     QUESTION 172 Which IPv6 address is the all-router multicast group?   A.       Read more […]

Continue reading


[Free] New Updated (October) Cisco 200-101 Real Exam 161-170

Ensurepass  QUESTION 161 Which IPv6 routing protocol uses multicast group FF02::9 to send updates?   A.       static B.        RIPng C.        OSPFv3 D.       IS-IS for IPv6 Correct Answer: B     QUESTION 162 On which options are standard access lists based?   A.       destination address and wildcard mask B.        Read more […]

Continue reading


[Free] New Updated (October) Cisco 200-101 Real Exam 141-150

Ensurepass  QUESTION 141 Refer to the exhibit. Which address range efficiently summarizes the routing table of the addresses for router Main?     A.        172.16.0.0./21 B.        172.16.0.0./20 C.        172.16.0.0./16 D.        172.16.0.0/18   Correct Answer: B     QUESTION 142 Which two data link layers are supported by Cisco Read more […]

Continue reading


[Free] New Updated (October) Cisco 200-101 Real Exam 151-160

Ensurepass  QUESTION 151 What are three benefits of implementing VLANs? (Choose three.)   A.       A higher level of network security can be reached by separating sensitive data traffic from other network traffic. B.        A more efficient use of bandwidth can be achieved allowing many physical groups to use the same network infrastructure. C.        A more efficient use of bandwidth can Read more […]

Continue reading


[Free] New Updated (October) Cisco 200-101 Real Exam 131-140

Ensurepass  QUESTION 131 Refer to the exhibit. A technician is testing connection problems in the internetwork. What is the problem indicated by the output from HostA?     A.       The routing on Router2 is not functioning properly. B.        An access list is applied to an interface of Router3. C.        The Fa0/24 interface of Switch1 is down. D.       Read more […]

Continue reading


[Free] New Updated (October) Cisco 200-101 Real Exam 111-120

Ensurepass  QUESTION 111 The internetwork infrastructure of company XYZ consists of a single OSPF area as shown in the graphic.   There is concern that a lack of router resources is impeding internetwork performance. As part of examining the router resources, the OSPF DRs need to be known. All the router OSPF priorities are at the default and the router IDs are shown with each router. Which routers are likely to have been elected as DR? (Choose two.)   A.       Read more […]

Continue reading


[Free] New Updated (October) Cisco 200-101 Real Exam 121-130

Ensurepass  QUESTION 121 Refer to the graphic. A company wants to use NAT in the network shown. Which commands will apply the NAT configuration to the proper interfaces? (Choose two.)   A.       R1(config)# interface serial0/1 R1(config-if)# ip nat inside   B.        R1(config)# interface serial0/1 R1(config-if)# ip nat outside   C.        R1(config)# interface fastethernet0/0 Read more […]

Continue reading


[Free] New Updated (October) Cisco 200-101 Real Exam 91-100

Ensurepass  QUESTION 91 What command is used to verify the DLCI destination address in a Frame Relay static configuration?   A.      show frame-relay pvc B.      show frame-relay lmi C.      show frame-relay map D.      show frame relay end-to-end   Correct Answer: C     QUESTION 92 The output of the show frame-relay pvc command shows “PVC STATUS = INACTIVE”. What does this Read more […]

Continue reading


[Free] New Updated (October) Cisco 200-101 Real Exam 101-110

Ensurepass  QUESTION 101 Which two of these statements regarding RSTP are correct? (Choose two.)   A.       RSTP cannot operate with PVST+. B.        RSTP defines new port roles. C.        RSTP defines no new port states. D.       RSTP is a proprietary implementation of IEEE 802.1D STP. E.        RSTP is compatible with the Read more […]

Continue reading


[Free] New Updated (October) Cisco 200-101 Real Exam 81-90

Ensurepass  QUESTION 81 At which layer of the OSI model does PPP perform?   A.      Layer 2 B.      Layer 3 C.      Layer 4 D.      Layer 5   Correct Answer: A     QUESTION 82 The command show frame-relay map gives the following output:   Serial 0 (up): ip 192.168.151.4 dlci 122, dynamic, broadcast, status defined, active   Which statements represent what is shown? Read more […]

Continue reading


[Free] New Updated (October) Cisco 200-101 Real Exam 51-60

Ensurepass  QUESTION 51 Which type of EIGRP route entry describes a feasible successor?   A.      a backup route, stored in the routing table B.      a primary route, stored in the routing table C.      a backup route, stored in the topology table D.      a primary route, stored in the topology table Correct Answer: C     QUESTION 52   Correct Answer:     QUESTION Read more […]

Continue reading